Instruction manual

2.0 Installation
2.1 Mechanical
The 1582-71/72 consists of one RF/Controller PCB and one smaller PCB containing the RF inputs and
outputs. It is housed in a 1 RU (1.75 inch high) by 12 inch deep chassis. Redundant switching power supplies
provide power for the assembly. The 1582-71/72 can be secured to a rack using the 4 holes on the front panel.
JP1
JP3
JP4
JP2
S4 - ROCKER SWITCH DETAIL
SHOWN WITH ALL SWITCH
POSITIONS IN THE ON SIDE
POWER
SUPPLY 2
POWER
SUPPLY 1
JP1, JP2, JP3, JP4, AND S4 POSITIONS SHOWN ICS AND LATCHED MODE
1
O
F F
ROCKER DOWN
4
3
2
FIGURE 2.1 1582-71/72 RF Switch Assembly
1582-71/72 Manual, Rev. C Page 6 06/23/11