Technical data

16 Agilent N5508A Hardware Reference
1 General Information
10 MHz OVEN OUT
The signal at this connector is the output of the 10 MHz ovenized crystal
reference oscillator. It is normally jumpered to the 10 MHz IN connector.
Characteristics
• Typical output power: +13 dBm
• Output impedance: 50 Ω
Operating considerations
External tuning: Tune this signal by applying a voltage to the VOLTAGE
CONTROL connector.
100 MHz OUT: -2 dBm
The signal at this connector is an output of the 100 MHz reference oscillator.
Characteristics
• Output impedance: 50 Ω
• Typical output power: –2 dBm
Operating considerations
External tuning: Tune this signal by applying a voltage to the VOLTAGE
CONTROL connector.
100 MHz OUT: +8 dBm
The signal at this connector is an output of the 100 MHz oscillator.
Characteristics
• Output impedance: 50 Ω
• Typical output power: +8 dBm
Operating considerations
External tuning: Tune this signal by applying a voltage to the VOLTAGE
CONTROL connector.