Technical data

General Information 1
Agilent N5508A Hardware Reference 15
Rear-Panel Interfaces
This section describes the function of the rear-panel connectors in
alphabetical order. Figure 5 shows the rear panel, which is identical for the
standard model and the option 002 model.
10 MHz IN
This connector accepts a 10 MHz reference signal for the unit’s phase lock
loops. It is normally jumpered to the 10 MHz OVEN OUT connector.
Limits and characteristics
• Level range: +7 to +13 dBm
• Input impedance: 50 Ω
Operating considerations
Noise and other impurities on a signal applied to this input will show up on
the output. The amount of noise and impurities passed through depends on
the tuning sensitivity.
Figure 5 N5508A rear panel
n5508a_opt002_rear_pnl
27 Apr 04 rev 1
GPIB
OUT
MULTIPLEXER
TUNE SPAN
OUT
10 MHz OVEN
OUT
10 MHz IN
+
8 dBm -2 dBm
BUFFERED
10 MHz OUT
+
20 dBm
600 MHz OUT
0dBm
115 V/3 A
230 V/2 A
50/60 Hz
LABEL
SERIAL NUMBER
LINE
154258
ICES/NMB-001
ISM GRP.1 CLASS A
N10149
FUSE: T 3.15 A 250 V
100 MHz OUT
SEE USERS MANUAL