Technical data

General Information 1
Agilent N5508A Hardware Reference 11
POWER
This switch puts the instrument in active operation or standby mode. It is a
standby switch and not a LINE switch. The detachable power cord is the test
set’s disconnecting device. It disconnects the mains circuits from the mains
supply before other parts of the instrument or system.
RMT (GPIB)
The remote indicator LED illuminates when the unit is enabled for GPIB
control.
SRQ (GPIB)
The service request LED illuminates when the instrument requests service.
TLK (GPIB)
The talk indicator LED illuminates when the system addresses the instrument
to talk.
µW LO (OUTPUT)
The signal at this connector is the source’s output.
Limits
• Frequency range: 2.4 to 25.8 GHz, in 600 MHz steps
• Output power (2.4 to 6.6 GHz): 0 to +16 dBm
• Output power (7.2 to 25.8 GHz): 0 to +10 dBm
Characteristics
• Output impedance: 50 Ω