Specifications

LS: MT9083A standard built-in stabilized light source, OPM: MT9083A standard built-in optical power meter
Model Optical Port LS OPM
MT9083A-050 1310 nm SM
√ √
MT9083A-051 1550 nm SM
√ √
MT9083A-052 1650 nm SM
√
—
MT9083A-053 1310/1550 nm SM
√ √
MT9083A-054
1550 nm SM
√ √
1650 nm SM
√ √
MT9083A-055
1310/1550 nm SM
√ √
1650 nm SM
√ √
MT9083A-056 1310/1490/1550 nm SM
√ √
MT9083A-057 1310/1550/1625 nm SM
√ √
MT9083A-058 1310/1490/1550/1625 nm SM
√ √
MT9083A-059 1310/1550/1625/1383 nm SM
√ √
Model Optical Port LS OPM
MT9083A-060 1490 nm SM
√ √
MT9083A-061 1625 nm SM
√ √
MT9083A-062 780 nm SM — —
MT9083A-063
850/1300 nm MMF
√ √
1310/1550 nm SM
√ √
MT9083A-064 850/1300 nm MMF
√
—
MT9083A-065 850 nm GI
√
—
MT9083A-068
780 nm SM — —
1550 nm SM
√ √
Battery Lithium Ion secondary battery
Voltage, capacity 11.1 V, 4200 mAh
Dimensions and mass 53 (W) x 19 (H) x 215 (D) mm, 360 g typ.
Operating tempera-
ture
Charging: +5 to +30˚C
Discharging: –20 to +60˚C
Storage: –20 to +50˚C, ≤90%RH
Battery pack
Rated AC input 100 to 240 Vac, 50/ 60 Hz
Rated DC output 12 Vdc, 3 A
Dimensions and mass 60 (W) x 34 (H) x 122 (D) mm, 305 g typ
Environmental
conditions
Operating temperature:
0 to +40˚C, 20 to 80% R.H.
Storage temperature:
–20 to +80˚C, 10 to 95% R.H.
AC adapter: Z0933A
Standard Light Source and Power Meter Built-in
Model MT9083A-001 MT9083A-011
Name IP Network Connection Check Function Gigabit Ethernet Upgrade
Measurement IF
IF Speed
10BASE-T/100BASE-TX : 1port 10BASE-T/100BASE-TX/1000BASE-T : 1 port
10M/100M Full, 10M/100M Half, Auto negotiation, Auto MDI/MDI-X
Connectivity Check
Connection mode
VLAN
OK/NG Judgment
PPPoE, DHCP, Manual
VLAN setup is possible in the DHCP Mode and Manual Mode. Single VLAN tag is supported.
VID: 1 to 4094, COS: 0 to 7
Connection Test
Ping Test
Trace Route Test
Can be executed after the connection is established by using the Connectivity Check function.
Number of times: 1 to 999, Timeout Threshold: 1 to 60 s
Timeout Threshold: 2 to 60 s, Hops: 1 to 255
Download throughput meas-
urement
Download file size
Download throughput value
Can be performed after the connection is established by using the Connectivity Check function.
The full wire rate is supported.
Up to 1 GB
Download file size [bits] / Download time [s]
Throughput measurement
Frame size
Transmit Rate
Transmit Duration Time
Resolution
Loss Tolerance
Can be performed after the connection is established by using the Connectivity Check function.
64, 128, 256, 512, 768, 1024, 1280, 1518, 9018, 9618 : The frame size 9018 and 9618 can be selected
when the link speed is 1000M.
1 to 100% of the line band (100% at full-wire rate), in steps of 1%
5, 10, 15, 20, 30, 60, 180, 300 s
1% or 5% of the line band
0, 0.01, 0.1, 1, 5, 10%
Counter measurement
Measurement time
Frame type
1 to 720 min, in steps of 1 min.
All frame, Only PPPoE frame, Only VLAN frame
11