Instruction manual

2.0 Installation
2.1 Mechanical
The 1200-88 consists of one RF/Controller PCB housed in a 1 RU (1 3/4 inch high) by 16 inch deep chassis.
A switching, ± 12, +24, +5 VDC power supply provides power for the assemblies. The 1200-88 can be secured
to a rack using the 4 holes on the front panel. Figure 2.1 shows how the 1200-88 is assembled.
POWER
SUPPLY
FIGURE 2.1 Mechanical Assembly
1200-88 Manual, Rev. A Page 7 8/18/10