Technical Manual

Technical Manual
ARGUS AM Floor System
Cross Point Device Explorer v1.2 Page 59 of 65
13.6.2 AM settings
The AM settings screen allows specific AM settings to be changed.
Figure 58: AM settings
The Burst frequency setting defines how many times per second a transmission burst is
send. The available options are:
@50Hz power frequency
@60Hz power frequency
50Hz (default) and 75Hz
60Hz (default) and 90Hz
The burst frequency setting is a system wide setting and will be applied
for all connected AM devices. It is not possible to set different burst
frequencies for different entrances.