Technical Manual

Technical Manual RF Mono
Cross Point Device Explorer v1.4 Page 43 of 47
7.8.5 Devices
The Devices screen shows a list of all connected devices, their firmware status and some
system settings.
Figure 37: System – Devices
In the Devices list it is possible to:
 View the firmware version of each connected device
 View which device is terminated
 Upload new device firmware
 Locate a device
 Reset a device
 Change the device name
Just move your mouse cursor over a device in the list and the Locate and Reset
buttons for that device will appear.
Locating a device 7.8.5.1
Press the Locate button once to activate the buzzer and/or LEDs on the selected
device. The Locate icon will start blinking and will keep on blinking. Press the Locate
button again to stop locating the selected device.
It’s also possible to start locating a device through the context menu of a device. Just
select the entrance and right-mouse-click on the antenna. The context menu will show
and the Locate option can be selected.
Resetting a device 7.8.5.2
Press the Reset button to reset only the selected device.