Technical Manual

Technical Manual RF Mono
Cross Point Device Explorer v1.4 Page 31 of 47
Other notifications 7.7.4.1.3
Notification
Explanation
Default notification
Enable this notification if you want to visualize that the antenna
is switched on. For example the green LED can be switched on
infinite to show the visitor that the system is active.
System jammed
Set this notification to notify store employees in case the
system is being jammed with a jamming device or as a result of
another high noise source.
Table 4: Other notifications
Saving notification settings 7.7.4.1.4
Notification settings can be saved for usage in other entrances or stores. Click the Load
and save notifications button and select the option ‘Save notifications’ from the menu
and the Save notifications dialog opens.
Figure 24: Save notifications
A list with pre-defined notifications that have previously been saved appears. Select one
from the list to overwrite the selected pre-defined notification, or enter a new name and
description for the new notification.
If you have an active internet connection, you can also tick the checkbox in front of the
option ‘Save on server’ to store this new pre-defined notification centrally, so it is also
available for your colleagues.
Click the Save button to store the notification.