Technical Manual

Technical Manual RF Mono
Cross Point Device Explorer v1.4 Page 26 of 47
Perspective view 7.7.3.2
Click the Perspective view button to change the 3D view into a perspective view, to be
able to quickly navigate to a specific aisle or antenna, especially useful for large
installations.
Figure 19: Perspective view
The Show/hide panels button is not available in this view.
Counting view 7.7.3.3
Click the Counting view button to change the 3D view to helicopter view and see the
number of visitors (Optima model only) or alarms per aisle.
Figure 20: Counting view - Alarms
The visitors counting view is only available when FORTUS RFM Optima systems are
being used.
The green number indicates the number of visitors that have entered the store through
that aisle. The red number indicates the number of visitors that have left the store through
that aisle.
Click the Show alarm counting button in the button bar to view the number of alarms
that have been detected for each aisle.
Click the Reset counting button to clear all counting totals for the selected type
(visitors or alarms) for this entrance.
Entrance arrange view 7.7.3.4
Click the Entrance arrange view button if you want to make any changes to the antenna
arrangement or other entrance and antenna related properties.