User's Manual

Contents
12 Be.U Mobile™ Technical Reference - 870246 V1.2
The charger has an AC adapter. Connect the adapter to a correctly
grounded 110/115 VAC power.Then connect the AC adapter into the
back of the charger:
Note
The battery charger is for the batteries of the SMC-800 series.
Do not use another charger. Do not use the charger with
other types of batteries, unless authorized by Cross Match.
Warning
The external battery charger is for office use. Use or storage
of the external charger in wet conditions cancels the warranty
and can cause dangerous shocks and electrical fires.
Insert a battery into the charger
Put the battery into the charger as shown in “External Battery Charger”
on page 11
. Make sure that the two contacts on the battery are in the
charger socket.
Status indicator
There is an LED indicator on the top side of the charger that displays the
status of the charger. The following table describes the indications that
the LED gives and describes the meaning of each indication.
Warning
Stop the device and remove the battery if one or more of the
following occurs.:
• You detect an odor
• The battery is hot to the touch
• The battery color changes
• The battery does not appear to be normal
• You see leaks.
If the battery fluid gets into your eyes, do not touch your
eyes. Clean your eyes with clear water and get immediate
medical help.
LED color Description
No light
The power supply is not connected. The charge is not
accepted.
Red
A battery is detected and has started charge.
Flashes red
The temperature is out of range (when the temperature is not
in the range of 10°C-45°C the charge stops).
Green
The battery has a full charge.
Draft