User's Manual

11
Replace the battery
During extended service in the field, you must change the main battery.
Use the external battery charger to prepare a set of replacement batteries.
The internal battery helps you to change the main battery without the loss
of your work and your settings. You must change the battery within 5
minutes to prevent the loss of data.
Caution
Always turn off the Be.U Mobile before you remove the main
battery to prevent damage to the device and data loss. See,
“Turn off the Be.U Mobile (suspend)” on page 15
for
instructions.
To replace the battery, open the battery access door as shown in “Install
the battery” on page 8.
Do the reverse of the procedure to remove the
battery.
Warning
Personal injuries can occur if you do not replace the batteries
correctly.
• Remove the battery if the battery cannot be used.
• Keep the battery away from direct sunlight and the heat from other
sources.
• Do not open the battery.
• Do not put the battery package in water, or allow the battery to
become wet.
• Do not put the battery on metal objects. Do not keep the battery with
metal objects. Short-circuits can occur between the contact pins and
the metal objects and cause heat, fire and leakage.
• Do not touch the contacts of the battery. The battery does not
function correctly when the contacts are dirty or are damaged,.
External Battery Charger
You must manage the charge of the batteries
with the external charger and a set of spare
batteries. Cross Match provides an accessory
for this purpose, the battery charger (part no.
SP-BC-02-B).
The operation of the battery charger is
automatic. When you insert a battery in the
charger, the battery charges and continues
until the battery reaches a full charge.
Draft