User's Manual

18 Verifier
®
Sentry Operator Manual 870391 V1.0
IntroductionUse the Sentry
4 Follow the instructions on the screen to capture the fingerprints.
5 Follow the procedure to capture a face photo of the person.
6 The demonstration application puts a box on the screen.
7 Put the face of the person into the box. The application captures the photo.
8 Touch the Use button. The application compares the biometrics to a database and reports the results of the
comparison.
9 To complete the process, the operator takes the actions described in the procedures for the organization.
Capture a photograph
An application is required to capture a photograph and save the photograph in a record.
1 Start the Sentry.
2 Start the application to save the photograph.
3 Sign into the application.
4 Select the camera from the desktop.
5 Take the photograph.
6 Follow the instructions to save the photograph in the record.
Read a barcode
An application is required to read a barcode and save the data in a record. The application shown here is a Crossmatch
demonstration application.
1 Start the Sentry.
2 Start the application to scan the barcode. The camera starts and displays red cross hairs over the image.
3 If more light is required, touch the button that turns on the light.