User's Manual
Table Of Contents
- Basic health and safety instructions
- The optional coaxial light feature
- Contents
- Figures
- Tables
- Introduction
- Installation
- How to use the Authenticator CF
- Maintenance
- Problems and Corrections
- Customer Care and Contact Information
- Product Warranty
- Index
Cleaning 4-1
4
Chapter 0Maintenance
T
HIS
CHAPTER
DESCRIBES
MAINTENANCE
PROCEDURES
THAT
INCREASE
THE
LIFE
OF
THE
DOCUMENT
READER
.
Cleaning
This section describes how to clean the document contact area and the case. A
clean document contact area is required for proper operation. Dirt can reduce the
image quality of the processed document. Clean the platen with normal glass
cleaner and make sure that no dirt, fluids or skin oils remain.
Warning
Do not pour liquids (water etc.) onto the document reader. The device is protected against
cleaning with a damp cloth or tissue. The device is not waterproof.
Caution
Do not use oil-based cleaners or abrasive cleaners.
Clean the document contact area
1 Open the ambient light cover of the document reader.
2 Spray the glass cleaner onto the document contact area.
Figure 4.1
Clean the document contact area
3 With a lint-free cloth or tissue, wipe off the document contact area until clean
and dry.