User's Manual
Table Of Contents
- Basic health and safety instructions
- The optional coaxial light feature
- Contents
- Figures
- Tables
- Introduction
- Installation
- How to use the Authenticator CF
- Maintenance
- Problems and Corrections
- Customer Care and Contact Information
- Product Warranty
- Index
3-10 D S C A N
®
AUTHENTICATOR CF™ User Manual v2.1
How to use the Authenticator CF
The RFID data groups page
The RFID Data groups page provides the ability to show all data groups in the
Hex-Format found on the RFID tag.
1 To select a single data group click the down arrow in the Select box and chose
the desired type of data group from the list (1).
• If no RFID data available the Select box is grayed out.
2 To view all data groups in sequence click on the left or right arrow (2) in the
right upper corner and scroll through all available data groups.
• If the content of a data group is an image, it will be displayed on the right
sight (3) below the Select box.
3 The button Save (4) allows you to store the content of the chosen data group on
your local disk.
Figure 3.11
RFID data groups page
3
2
1
4