User's Manual
Table Of Contents
- Basic health and safety instructions
- The optional coaxial light feature
- Contents
- Figures
- Tables
- Introduction
- Installation
- How to use the Authenticator CF
- Maintenance
- Problems and Corrections
- Customer Care and Contact Information
- Product Warranty
- Index
Attach the Authenticator CF to a surface 2-11
Installation
Caution
Make sure that the screws do not extend more than 0.295 inches (7.5 mm) above the
surface. Longer screws will damage the bottom of the device.
7 Attach the device to the surface with the four screws.
Figure 2.11
Fasten the Authenticator CF
8 You have completed the procedure.