User's Manual
Table Of Contents
- Basic health and safety instructions
- The optional coaxial light feature
- Contents
- Figures
- Tables
- Introduction
- Installation
- How to use the Authenticator CF
- Maintenance
- Problems and Corrections
- Customer Care and Contact Information
- Product Warranty
- Index
2-10 D S C A N
®
AUTHENTICATOR CF™ User Manual v2.1
Installation
3 Make four holes.
4 Get the Authenticator CF and put it upside-down on a desk or table.
Note
Protect the top of the device with a soft cloth and keep all sharp or pointed objects away
from the surface.
Figure 2.9
Remove rubber feet
5 Remove all four rubber feet at the bottom. Lift the edge with your nail and pry
them away. You have now access to the four mount points (1) of the device.
Store the rubber feet in a safe place.
Caution
Do not press on the device. This may damage the cover.
Figure 2.10
Mount points
6 Use M4 metric screws to fasten the Authenticator CF. The mount points on the
document reader are 0.295 inches (7.5 mm) deep.
1