User's Manual
Table Of Contents
- Basic health and safety instructions
- The optional coaxial light feature
- Contents
- Figures
- Tables
- Introduction
- Installation
- How to use the Authenticator CF
- Maintenance
- Problems and Corrections
- Customer Care and Contact Information
- Product Warranty
- Index
2-4 D S C A N
®
AUTHENTICATOR CF™ User Manual v2.1
Installation
Figure 2.3
Top view of the D SCAN AUTHENTICATOR CF
Ambient light cover
The cover is attached by two bolts, one on each side, at the upper back of the
D
SCAN AUTHENTICATOR CF. This allows three positions, closed (1),
operation (2) and open (3). To put the cover in one of these positions, lift the front
edge. Two ball catches hold the cover in the operation position.
Table 2.2
Top features
# Description
1
Document position angle. The document positioning angle helps to guarantee
the exact final position of the document for authentication.
2
Optical scan area. The glass bearing surface where documents are placed to be
verified. A dotted line shows the area where the device reads the document.
3
Document support area. The part of the glass bearing surface which is not used
for scans. The area allows you to put larger documents down correctly. The area
is covered by the RFID antenna.
1
2 3