User's Manual

Appropriate Operation 1-1
1
Chapter 0Introduction
Appropriate Operation
The D SCAN® AUTHENTICATOR CF is a full color image and full page reader
for the intended use of acquisition and transmission of personal and document
data. The device has the capability to capture images of an entire data page of any
ID document in different illuminations and to read RFID data contactless found
on the RFID chip.
It is intended for the use in IT-devices area and the operation and installation must
be in connection with suitable computer equipment. When operating, the
electrical installation and cabling must comply with the IEC 60950 standard.
Who should read this book
You should read this book if you are a user and you will be operating the D SCAN
AUTHENTICATOR CF document authentication reader device.
How this book is arranged
• Chapter 1 “Introduction” covers standards for the manual and describes
the safety instructions. The chapter also contains a glossary of terms.
• Chapter 2 “Installation” describes the D SCAN AUTHENTICATOR CF
and how to install the document authentication reader.
• Chapter 3 “Starting the first time” describes a tool that helps to perform a
complete interactive diagnosis of the document authentication reader and
how to create background images.
• Chapter 4 “How to use the Authenticator CF” describes how to use the
indicators on the device to capture the best quality images.
• Chapter 5 “Maintenance” explains how to maintain the D SCAN
AUTHENTICATOR CF.
• Chapter 6 “Problems and Corrections” describes the problems, causes,
and corrections.
• Chapter 7 “Customer Care and Contact Information” explains how to
get the technical support that is available from Cross Match Technologies.