User's Manual
Table Of Contents
Cleaning 5-1
5
Chapter 0Maintenance
T
HIS
CHAPTER
DESCRIBES
MAINTENANCE
PROCEDURES
THAT
INCREASE
THE
LIFE
OF
THE
DOCUMENT
READER
.
Cleaning
This section shows and describes how to clean the document contact area and the
case. A clean document contact area is required for proper operation. It prevents
dirt from reducing the image quality of the processed document.Clean the platen
with normal glass cleaner and make sure that no dirt, fluids or skin oils remain.
Warning
Do not pour liquids (water etc.) onto the document reader. The document reader device is
protected against cleaning with a damp cloth or tissue, however it is not waterproof.
Caution
Do not use oil-based cleaners or abrasive cleaners.
Cleaning the document contact area
1 Spray the glass cleaner sparingly onto the document contact area.
Figure 5.1
Clean the document contact area
2 With a lint-free cloth or tissue, wipe off the document contact area until clean
and dry.
3 Ensure that the document contact area is dry before starting the reading
process.