User's Manual

4-6 D SCAN
®
AUTHENTICATOR CF™ User Manual V2.0
How to use the Authenticator CF
• The left side shows both captured images. At the top the image taken with
visible light (1) and below with infrared light (2).
• The right side shows the captured visible data (3), which are printed on the
document.
• Additionally security information, error messages and processing
information (4) are shown at the lower part on the right side. Errors or failed
verifications are shown in red.
•The Abort Scan button allows the operator to interrupt the scanning process.
The Images page
1 The tab Images provides the ability to show all available images in full screen
resolution captured under different illuminations depending on the features
installed in the D SCAN AUTHENTICATOR CF.
• Click the down arrow in the Select box to see a list (5) containing all
possible images. Chose the desired image from the list using the mouse.
The D SCAN AUTHENTICATOR CF does not support all image types of
this list. To check which image types will be supported start the D SCAN
TestWizard and refer to the Image Acquisition page.
• Clicking the button Save, stores the chosen image on your local disk.
Figure 4.5 Image page
5