User's Manual

Read in a document 4-5
How to use the Authenticator CF
• Depending on the performance of your computer, starting up can take a short
moment.
• After successfully initialization the Overview window appears.
Warning Do not look directly into the lights of the document contact area. Maintain a required
minimum distance of not less than 11.8 inches (0.3 m).
5 Put the data page of the document to be read face down on the document
contact area so that the MRZ is pointing left.
6 A short acoustic signal indicates that the document is in the correct position.
The processing starts automatically and the processing light is yellow.
Note Don't move the document until the yellow processing light turns off.
7 Now you can remove the document. The yellow processing light indicates that
an image was recorded and is being processed.
• When the D SCAN AUTHENTICATOR CF has completed processing the
document, the processing light turns off, the green operation light comes on
and a short acoustic signal occurs.
8 All data submitted to the computer are displayed on the computer screen.
The Overview page
•The Overview page is the default page to show the data of the processed
document. Use the tabs at the top to navigate and to view all data and
images.
Figure 4.4 Overview page
1
2
3
4