User's Manual

3-6 D SCAN
®
AUTHENTICATOR CF™ User Manual V2.0
Starting the first time
Figure 3.6 RFID reader test page
3 After completing click Next to continue the test session. The Image Acquisition
page appears.
Testing the reader unit
The document reader contains a digital camera, which is able to work for
capturing images with different illuminations. By examining the document reader
properties you are able to test all supported image types.
•The Image Acquisition page shows a list of all available image types
containing the Test, the Image ID, and Test Status information.
• At the top of the list some important information are shown concerning the
test procedure and where the test images can be saved. To change the default
location click Select Folder (1) and choose the location where the images
are to be stored. The test images may be required for the technical support
department to correct problems.
• The tests can be performed either as single tests for each image type
separately by using the button Test or testing all capture modes in sequence
using Test All. For single tests highlight the desired capture mode using the
mouse cursor.
• Double-clicking a test image in the list opens the implemented image viewer
allowing you to check the image quality.
Note Before testing the capture modes clean the glass platen of the document reader. A clean
platen is required for proper operation.
1