User's Manual

3-4 D SCAN
®
AUTHENTICATOR CF™ User Manual V2.0
Starting the first time
Detailed document reader information
After successful initialization, the Device Overview page appears, showing you
the following information about the document reader connected to your computer.
• The device type, serial number and initialization status,
• Firmware and revision version,
• Production date and last service,
• Operating times and some more properties
Figure 3.4 Device overview page
1 After reading this information click Next to start the User Controls page.
Testing the user controls
The User Controls page shows all available user controls supported by your
document reader and allows to check its LEDs and the available beeper (tunes).
Because that the D SCAN AUTHENTICATOR CF has no control elements the
LEDs test button is selected per default for testing.
1 Click LEDs Test to start the test procedure for the status LEDs. A default test
pattern will be executed illuminating the LEDs in sequence.
2 To test the buzzer click Buzzer Test.
Note You must perform both tests to activate the button Next .