User's Manual

Installation 2-7
Installation
Installation
This section describes how to install the D SCAN AUTHENTICATOR CF.
Remove the contents
Note Keep all original materials in the event you return the document reader.
Remove all the contents from the product package.
List of contents
The following items are included in the product package:
• D SCAN AUTHENTICATOR CF document authentication reader
• External power supply unit
• USB A-B signal cable
• D SCAN Essentials Runtime CD
• D SCAN AUTHENTICATOR CF User Manual on CD
• White/yellow test chart (creation of background images ????)
Prepare to use
Make sure that the following conditions exist before you use the D SCAN
AUTHENTICATOR CF.
• After transportation or storage at low temperature, allow the reader to
adjust to the temperature at the location of operation.
• Store the document reader in a warm dry location.
• The product is on a level surface.
• The surface of the document contact area is clean and dry.
• Protect the document reader from dust and humidity.
• Keep all sharp and pointed objects away from the document contact area
surface.
Connect the Authenticator CF
Note Before you begin, ensure that the device reached room temperature before powering on the
device. The procedure applies to desktop and laptop computers.
The connectors are on a connection box at the back of the device. Use the
following procedure to install the D SCAN AUTHENTICATOR CF USB and
power cables.
1 Put the device on a clean flat area like a table, that is free of dust.
2 Slightly lift the back of the device. You see the connection box with the power
(2) and USB (1) connectors.
3 Get the USB and power cables.