User's Manual

2-4 D SCAN
®
AUTHENTICATOR CF™ User Manual V2.0
Installation
Figure 2.3 Top view of the D SCAN AUTHENTICATOR CF
Ambient light cover
The cover is pivoted by two bolts, one on each side, at the upper back of the
D SCAN AUTHENTICATOR CF. This allows a three-point positioning, closed
(1), operating (2) and opened (3). To move the cover in one of these position lift it
at the front edge. Two ball catches hold the cover in the operating position.
# Description
1
Document positioning angle. The document positioning angle helps to
guarantee the exact final position of the document for authentication.
2
Optical scan area. The glass bearing surface where documents are placed to be
verified. A dotted line shows the area of optical reading.
3
Document support area. The part of the glass bearing surface which is not used
for scanning. It supports positioning larger documents correctly and is also
covered by the RFID antenna.
4
Ball catches. One ball catch is located on each side of the document contact
area.
1
2
4 4
3