User's Manual

Statement of Compliance 1-3
Introduction
Statement of Compliance
Cross Match Technologies GmbH, hereby, declares that this device is in
compliance with the essential requirements and other relevant provisions of
Directives 89/336/EEC and 2006/95/EC.
Declaration of Conformities may be directly obtained from Cross Match
Technologies GmbH.
Recycling information
Cross Match Technologies recommends that customers dispose of their used
computer hardware, monitors, printers and other peripherals in an
environmentally sound manner. Potential methods include reuse of parts or whole
products and recycling products, components and/or materials.
WEEE Directive
The following is the test of the Waste Electrical and Electronic
Equipment (WEEE) Directive.
In the European Union, this label indicates that this product should
not be disposed of with household waste. It should be desposited at
an appropriate facility to enable recovery and recycling.
Safety when operating
This product has been designed, manufactured and tested according to
international safety standards. The following general safety precautions must be
observed during all phases of operation to ensure safe operation of the D SCAN
AUTHENTICATOR CF. Cross Match Technologies GmbH assumes no liability
for the customer's failure to comply with these requirements.
• When operating, the electrical installation and cabling must comply with the
IEC 60950 standard.
• The power supply must be provided by an certified power supply unit with
an output voltage of 21 ±3 V DC. The electric current range of the power
supply unit must be min. 1 A and max. 7A. Use the desktop power pack
which is provided with the product package.
• To connect the document reader to a computer, use a shielded USB data
cable as supplied with the reader.
• The device must be operated only in a dry room. Exclude any condensation.
• The environmental temperature range is 50°F to 113°F (10°C to 45°C).