User's Manual

1-2 D SCAN
®
AUTHENTICATOR CF™ User Manual V2.0
Introduction
Standards
The following standards are used in this book:
• Bold UPPER/lower case and tilted text identify important information.
• Special information can appear as a Note, Caution, Warning, or Danger.
Note A Note contains additional information. To ignore a note can cause a delay, but not
mechanical damage or personal injury.
Caution A Caution contains a method to prevent data loss or damage to equipment. To ignore the
caution can cause damage or data loss.
Warning A Warning describes an action that can cause injury or loss of life. Mechanical damage can
occur.
DANGER A Warning describes an action or condition that causes injury or loss of life. Mechanical
damage can occur.
FCC statement
FCC ID: WO8RJ0479
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The power source for the AUTHENTICATOR CF must provide an output voltage
of 21 ±3 V DC. The electric current range of the power supply unit must be min. 1
A and max. 7 A. Use only power supply units that comply with the class B limits
of 47 CFR 15, Subpart B.
Industry Canada
IC: 7944A-RJ0479
This Class B digital apparatus complies with Canadian ICES-003. Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
The power source for the AUTHENTICATOR CF must provide an output voltage
of 21 ±3 V DC. The electric current range of the power supply unit must be min. 1
A and max. 7 A. Use only power supply units that comply with the class B limits
of ICES-003.