Install Instructions

STEP 3 Fill and purge the manifold.
STEP 4 Attach Cross motor carriage and control.
NOTE! To ensure proper system performance,
it is important to purge the system.
Screw handles in on sides.
Plug motor into Cross Control
A Connect garden hose to
supply hose bib connection
on manifold, and hook up
the other end to house
pressure.
B Connect garden hose to return manifold,
and place the other end to drain or bucket.
C Turn all Cross valves too the off position=
DAllowhighpressurefromsourcetoow
through loops one at a time, starting
from furthest valve away from drain.
Black Up