Owners Manual

49-1000105 Rev. 0 17
INSTALLATION INSTRUCTIONS
Installation Instructions
Refrigerator Models
XSS23G, XSS25G
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
•
IMPORTANT — Save these instructions
for local inspector’s use
•
IMPORTANT — Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer –Keeptheseinstructionsfor
future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time – Refrigerator Installation
30 minutes
Water Line Installation
30 minutes
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
If the refrigerator has already been installed, remove
the base grille (see Step 2 in Moving the Refrigerator),
then skip to Step 5 in Installing the Refrigerator.
PREPARATION
WATER SUPPLY TO THE ICEMAKER
(on some models)
If the refrigerator has an icemaker, it will have to be
connected to a cold water line. A water supply kit is
available at extra cost from your dealer, by visiting our
Website at GEAppliances.com, or from Parts and
Accessories, 877.959.8688.
TOOLS YOU WILL NEED
Phillips Head Screwdriver
3/8”and5/16”Socket 1/2”and7/16”Wrench
PlasticPuttyKnife