Owner`s manual
Table Of Contents
- Quick Start Guide
- Owners Manual
- Introduction
- Placing the System
- Supplied Accessories
- Parts & Controls
- Connections
- Turn Off TV Speakers
- Using the Remote Control
- About TVee's Automatic Power Modes
- About the TVee Control Button LEDs
- Listening Modes
- Night Mode
- Volume Change Indication
- Using Bluetooth
- Use Any Remote to Control Your TVee One
- Troubleshooting
- Specs
- Warranty

8
E
N
G
L
I
S
H
Disable Your Television’s Speakers
Disable your television’s built-in speakers when using TVee One. Usually, this is accomplished via an on-screen setup menu
POZPVSUFMFWJTJPO-PPLGPSBOi"VEJPwPSi4PVOEwTVCNFOVBOEBi4QFBLFST0õwi%JTBCMF4QFBLFSTw&YUFSOBM4QFBLFSTPS
similar menu item. Some televisions have a switch on the rear panel to disable the built-in speakers. If your television does not
have these functions, lower the volume of the television all the way down to 0, or mute the television.
Don’t leave the television speakers on so that both systems play simultaneously;
this will not yield sound that is louder or “better.”
The TVee One Remote Control
"SFNPUFDPOUSPMJTTVQQMJFEXJUI57FF0OF*UTLFZTEVQMJDBUF57FF0OFTGSPOUQBOFMCVUUPOTXJUIPOFBEEJUJPO%BZ/JHIU
BOEPOFEFMFUJPOUIFi-FBSOwLFZ
Selects TV audio input
Selects the Bluetooth wireless audio input
Power on/standby
Day/Night; toggles Night Mode
on and o (see “Listening
Modes,” page 10)
Selects the Listening Mode
Volume up
Volume down
Mute
CR2025
10º
Remember, you can use your television
or cable/satellite-box remote
to operate TVee One;
see “Use Any Remote to Control your
TVee One,” on page 12.
Note: Don’t forget to insert
the included battery into
your remote control.