User's Manual

1. 45 RPM Adapter

2. Turntable Platter

3. Tonearm Lever

4. Tonearm

5. Auto-stop Switch

6. Speed Switch

7. Needles

General Operation

Essential Setup

1. Place the speakers on a flat and level surface. The selected location should be stable and free from vibration.

2. Connect the external speaker cable from the speakers to the main unit’s L/R jack.

3. Plug the power cord to unit firstly and then plug the adapter to wall power outlet.

4. Press the Power button on the unit to the turn on and off.

BLUETOOTH MODE

1.Press the Mode button to select the Bluetooth mode, the mode indicator will be blue and flashing.

2. Turn on the Bluetooth feature of your audio device, search for“CROSLEY CR7020A”and pair.

3. Once your device is successfully connected with the speakers, you will hear a short confirmation sound from the speakers

and function indicator will be solid blue.

4. Play and stream music from your device to the speakers.

FM MODE

When you switch the unit to the Radio Mode, the mode indicator will be a solid green. You can listen to the FM radio program

in this mode.

1. In FM mode, press the PLAY/PAUSE key on the unit to automatically search station. It will save the station once searching

completed.

2. Press the or on the unit to select station.

Turntable Operation

1. Switch the unit to the phono mode. The mode indicator will be green and flash.

2. Select the desired speed（331/3, 45, 78） and place the record on the platter.

(Remark: When playing a 45 RPM record, please use the 45 RPM adapter.)

3. Remove the stylus protector from the stylus. Release the tone arm from the tone arm clip.

4. Use the tonearm lever to raise the tonearm. Move the tonearm gently to desired position over the record. Push the lift

lever again to descend the tonearm slowly onto the desired position on the record to start playing.

5. When the record is finished playback, push the tonearm lever again to lift up the tonearm. And return the tonearm to the

arm rest. Use the tonearm lever to descend the tonearm.

Remark:

1.When the Auto stop switch is “ON”, the record will stop automatically when finished. When the Auto stop switch is “OFF”,

the record will not stop automatically when finished.

2.Do not touch the stylus tip by fingers.

AUX IN

Switch to AUX mode, the mode indicator will be cyan. Connect one end of a 3.5 mm audio cable to speaker’s AUX INPUT jack,

then connect the other end to the output jack of your audio device(such as Mobile phone/MP3 Player).

Trouble Shooting