User's Manual

3
BLUETOOTH MODE
The first time you use your Bluetooth device with this player, you will need to connect or "pair" it with the player first.
1. Switching to Bluetooth mode. The display will show “bt”. Flasing “bt” indicate that the system has entered pairing mode and
will be searchable by your Bluetooth enabled device.
2. Activate your Bluetooth enabled device and select the search mode. “CROSLEY CR7019A”will appear on your Bluetooth
device list. Select “CROSLEY CR7019A ” in the pairing list.
3.The “bt” letter on display will become solid if pairing succeeds.
FM MODE
When you switch the unit to the Radio Mode, you can listen to the FM radio program in this mode.
1. In FM mode, press the PLAY/PAUSE key on the unit to automatically search station. It will save the station once searching
completed.
2. Press the or on the unit to select station.
Turntable Operation
1. Switch the unit to the phono mode. The display will show “ PHON”.
2. Select the desired speed（331/3, 45, 78） and place the record on the platter.
(Remark: When playing a 45 RPM record, please use the 45 RPM adapter.)
3. Remove the stylus protector from the stylus. Release the tone arm from the tone arm clip.
4. Use the tonearm lever to raise the tonearm. Move the tonearm gently to desired position over the record. Push the lift
lever again to descend the tonearm slowly onto the desired position on the record to start playing.
5. When the record is finished playback, push the tonearm lever again to lift up the tonearm. And return the tonearm to the
arm rest. Use the tonearm lever to descend the tonearm.
Remark:
1.When the Auto stop switch is “ON”, the record will stop automatically when finished. When the Auto stop switch is “OFF”,
the record will not stop automatically when finished.
2.Do not touch the stylus tip by fingers.
AUX IN
Switch to AUX mode, the display will show “AUX”. Connect one end of a 3.5 mm audio cable to speaker’s AUX INPUT jack,
then connect the other end to the output jack of your audio device(such as Mobile phone/MP3 Player).
Trouble Shooting
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
Problem
Solution
There is no power
-Power cord is not properly connected.
-No power at the power outlet.
There is no sound from the speakers
-The speaker jack is not properly connected.
The speakers could not be connected to my
Bluetooth device
-The device’s Bluetooth function is not turned on.
-The speakers are actively connected to another Bluetooth device.
The turntable speaker stop before the record is finished.
-Adjust the Auto-stop switch to “OFF” position.