CR612 The Corsair Instruction Manual 910-230500-001
IMPORTANT SAFETY INSTRUCTION WARRANTY Crosley Radio Products are warranted against defects in material and workmanship for a period of 90 days beginning from the date of sale to the original purchaser. Should the unit fail under normal usage during the 90 day warranty period, a request for RETURN AUTHORIZATION (R.A.) must be made by the original customer before returning the unit. Call Crosley Radio customer service for Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to Friday.
WARNING: General TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Connect your stereo headphones (not included) to the HEADPHONE JACK (10).
Clock & Alarm Operation Battery Back-Up This Model includes a battery back-up circuit. The battery will maintain the clock and alarm settings in the event of a power failure. The battery back-up requires one 9V battery (not included). The battery compartment is located on the back of the radio. To install/replace the battery, follow the instructions below. 1 Press in on the locking tab to remove the BATTERY COVER (25). Welcome Thank you for purchasing the Crosley Corsair (CR612).
Control Locators Clock & Alarm Operation Unit Controls 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 4 Tuner Dial LED Display FM Stereo Indicator Speakers Power Button Tuning Knob AM/FM Switch Function Switch Volume Knob Headphone Jack Sleep Alarm 1 Alarm 2 Time Program Forward Skip Backward Skip CD Mode CD Display Stop Play/Pause 1 4 10 2 8 7 9 11 Snooze Function 3 5 6 12 13 14 4 Sleep Function Using the snooze function will temporarily turn the alarm off for a period of 6 minut
Clock & Alarm Operation Control Locators Setting The Clock Unit Controls The clock time can be set with the power turned on or off as long as the unit is plugged in. To set the clock, follow the instructions below. To set Alarm 2 1 Press Alarm 2. The clock display will switch to alarm time and start to flash. The Alarm 2 LED will come on. 1 Press the TIME (14) button. The clock display will begin to flash. 2 2 Press the FORWARD SKIP (16) button to set the hour.
Getting Started RADIO Operation CD Player AM/FM Tuning Unpacking 1 Pull the packing materials off the unit. 2 Remove the plastic bag covering the radio. 3 Press OPEN (23) to open the CD DOOR. 4 Remove the cardboard shipping card from the CD Player. 5 Unwind FM Antenna (24) and allow it to hang straight down. 6 Remove plastic bag covering the AC Power Cord (26). Note: Save all packing materials. 1 2 Turn the FUNCTION SWITCH (8) to the Radio position.
