User Manual

6
Upon delivery the Jukebox player mechanism will be locked into position by 4 wing
nuts that are located under the play deck. These must be loosened before initial
operation. The loosening of the wingnuts allows the mechanism to float freely and
dampen any vibrations which may effect the vinyl playback.
To loosen the retaining bolt wingnuts :
- Unlock the rear cabinet door (shown in FIG 1) and remove the cabinet door.
- Locate the retaining bolts and wingnuts. Two are located at the front of the
mechanism and two at the rear as shown in FIG 2.
- Carefully loosen the wingnuts on the retaining bolts, allowing them to rest on
the rubber grommets as shown in FIG 3.
VINYL MECHANISM AS SEEN FROM REAR OF CABINET
FIG 2
Location of 4 x
retaining bolts and
wingnuts.
Retaining bolt
and wing nut
shown in
position upon
delivery.
Loosen
wing nut to
this point
FIG 3