User Manual

22
9) Bluetooth
Installing the Bluetooth receiver:
The Bluetooth receiver is an accessory and therefore may not be installed at the
time of purchase. No tools are required to install the Bluetooth receiver.
1. The audio cables (phono) and power connections are already installed. Upon
delivery these cables will be located on the lock side of the shelf that is situated
underneath the player mechanism. (shown in step 1 below.) The Bluetooth receiver
will also be packaged inside the jukebox.
2. Plug each cable into the Bluetooth receiver as shown in step 2. Insert the black
and red plugs into the bluetooth receiver. The grey power cable pushes into its
socket and clips into place.
3. Remove the backing from the self adhesive tape on the back of the Bluetooth
receiver and attach firmly to the shelf as shown in step 3.
1. 2. 3.