User's Manual

Control Locators CD Operation
1 Press FUNCTION until “A1*D”A1*appears on
LCD display.
2 Press OPEN/CLOSE to open the CD tray.
3 Place a CD in the CD drawer with the label side
facing up.
4 Press OPEN/CLOSE again to close the CD
tray.
5 The total number of tracks and the total play
time will show on the display.
6 Press PLAY/PAUSE to begin playback.
7 Press SKIP+ to skip forward to the next track.
8 Press SKIP- to skip backward to the previous
track.
9 Press STOP to stop playing the CD.
10Press PLAY/PAUSE to pause/resume the CD.
CD Operation
Up to 64 tracks can be programmed for play in any
desired sequence.
**The track must be programmed in the stop mode.
**The same track can be programmed more than
once.
1 Make sure the CD is stop playing, press the
PROGRAM button."00" will begin to flash on the
display. After a second, "Memory" and " 000 P
- - 01" will show on the display.
2 Press SKIP+ or SKIP- to select the desired track
3 Press PROGRAM to store the selected track.
"00" and "P--02" will be shown on the display.
4 Repeat steps 2 and 3 to program additional
tracks into memory if needed..
5 Press PLAY/PAUSE to begin playback of the
programmed tracks.
Note: a. up to 64 tracks can be programmed
b. If programming songs from MP3 CD's
which contains different albums/folder,
after pressing PROGRAM, use SKIP+ or
SKIP- buttons to select an album/folder
and press the PROGRAM button again
to enter the album/folder. Once the
album/folder is selected, proceed with
steps 2-5 above to program tracks into
memory.
Programming
9
4
REMOTE SENSOR
LCD DISPLAY STAND BY
EQ POWER
FIND/ESP
FUNCTION
PLAY / PAUSE
CD/TUNER SKIP +
STOP
OPEN/CLOSE
CD/TUNER SKIP -
CD DRAWER
VOLUME DOWN
VOLUME UP
PROGRAM
PRESET-DOWN
RANDOM
PRESET-UP
REPEAT
BAND
BBS
LIGHT
INTRO
MUTE
POWER PLUG
AUX. IN
FM ANTENNA:300
SPEAKER INT. EXT. MIX
EXT. SPEAKER
SPEAKER
TRAY
3.5MM
AUDIO CABLE
SPEAKERSPEAKER