Instructions / Assembly

Step 6.

Put the flame glass (part B) into the fire bowl. Ensure flame glass (part B) is not

covering pilot housing, as shown below. Place lid (part A) over fire bowl. The lid

(part A) must be removed when burner is in use. Wait until the appliance cools

before placing lid (part A) over fire bowl.

NOTE: Do not dump flame glass (part B) out of package. Carefully place flame glass

(part B) by hand to prevent dust from clogging burning.

Step 5. Carefully turn appliance upright. Line up the pins on the hinges from door panel (part E)

with the holes in the hinges from left door leg (part I) and slide them together as shown

below.