Outdoor Wicker Float Towel Valet CO7304
PART LIST A B Long Side Panel Short Side Panel 2 PCS 2 PCS F Top Frame 1 PC K Locking Caster 2 PCS G Rib 4 PCS L Swivel Caster 2 PCS HARDWARE LIST #1 M6*15mm Short Bolt 8 PCS #2 Bottom Panel 1 PC H Hub 1 PC M Top Cover 1 PC #3 M6*40mm M6mm Washer 36 PCS Long Bolt 28 PCS M6*15mm Short Bolt 2 PCS #2 #3 M6*40mm Long Bolt 3 PCS I Long Post 4 PCS Connector 4 PCS N Fabric Curtain 1 PC #4 EXTRA HARDWARE LIST #1 E D C M6mm Washer 3 PCS 2 M6mm Allen Key 1 PC J Shelf 1 PC
Step 1. Attach long side panels (part #A) to long posts (part #D) using the long bolts (part #2), washers (part #3) and allen key (part #4).Attach swivel casters (part #L) and locking casters (part #K) to long posts (part #D). NOTE: Please do not fully tighten bolts until unit is fully assembled. D #3 #2 #4 D #3 #2 #4 A K L A #2 #3 X8 X8 #2 #3 X4 X4 Step 2.
Step 3. Attach assembled parts (part #A,D,L&K) to short side panels (part #B) of assembled parts (part #A,B,D,L&K) using long bolts (part #2), washers (part #3) and allen key (part #4). #3 #2 #4 A D B #2 #3 X4 X4 Step 4. Attach bottom panel (part #C) to short side panels (part #B) of assembled parts (part #A,B,D,L&K) using long bolts (part #2), washers (part #3) and allen key (part #4).
Step 5. Attach shelf (part #E) to long posts (part #D) of assembled parts (part #A,B,C,D,L&K) using long bolts (part #2), washers (part #3) and allen key (part #4). D E #3 #2 #4 #2 #3 X4 X4 Step 6. Attach top frame (part #F) to long posts (part #D) of assembled parts (part #A,B,C,D,E,L&K) using long bolts (part #2), washers (part #3) and allen key (part #4).
Step 7. Attach connectors (part #I) to top frame (part #F) of assembled parts (part #A,B,C,D,E,F,L&K) using short bolts (part #1), washers (part #3) and allen key (part #4). F I #3 #1 #3 #1 #4 X4 X4 Step 8. Fully insert ribs (part #G) into the hub (part #H) until spring clips click into place.
Step 9. Unfold top top cover (part #M) and attach to assembled parts (part #G&H) as shown below. Attach finial to hub (part #H) of assembled parts (part #G,H&M) to secure together. Step 10. Attach assembled parts (part #G,H,J&M) to connectors (part #I) of assembled parts (part #A,B,C,D,E,F,I,L&K) using short bolts (part #1), washers (part #3) and allen key (part #4). NOTE: Please fully tighten all bolts at this time.
Step 11. Secure fabric curtains (part #N) to top frame (part #F) of the completed unit with Velcro ® straps as shown. F N Velcro ® N Step 12. NOTE: Curtains (part #N) can be held open by using the Velcro ® straps to secure them to long posts (part #D) of the completed unit as shown below.
