Outdoor Wicker Cocktail Table CO7238
PART LIST A C B Top Panel 1 PC Side Panel 2 PCS Center Panel 1 PC HARDWARE LIST #1 #2 M6*20mm Short Bolt 4 PCS (Extra 1) #3 M6*30mm #4 M6mm Long Bolt Flat Washer 8 PCS (Extra 1) 12 PCS (Extra 1) 2 M6mm Allen Wrench 1 PC
Step 1. Attach center panel (part C) to side panels (part B) using short bolts (part #1), flat washers (part #3) and allen wrench (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled. B #3 #1 C #4 B #1 x4 #3 x4 #4 x1 Step 2. Lay top panel (part A) upside down on a soft flat surface, such as carpet, as shown below. Attach assembled unit (parts B & C) to top panel (part A) using long bolts (part #2), flat washers (part #3) and allen wrench (part #4).
Step 3. Carefully turn unit upright on a flat surface.
