Instructions / Assembly

Step 1.
Attach side panel (part A) to top panel (part B) using long bolts (part #2), flat
washers (part #3) and allen wrench (part #4).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
Lay top panel (part B) down on a soft flat surface, such as carpet, as shown below.
Step 2.
flat washers (part #3) and allen wrench (part #4).
NOTE: Please do not fully tighten bolts until unit is fully assembled.
Attach rails (part C) to side panel (part A) and top panel (part B) using short bolts (part #1),
#3
x3
#2
#4
x1
x3
#3
#1
#4
#3
x4
#1
#4
x1
x4
B
C
#4
#2
#3
A
B
A
#4
#1
#3
C
3