Instructions / Assembly

Attach Side Frame (C & D) to seat (B) With Bolts (Part #6),Flat Washers (Part #8),
Spring Washers ( Part #7) & Nuts (Part #9).Note - Do not tighten Nuts (Part #9)
fully at this time.Cover M8X30 mm bolts (Part #6)with bolt caps (Part #12).
Step 1:
Attach Back (A) to unit with Phillips Head Bolts (Part #1), Flat Washers(Part #3),
Spring Washers (Part #2), and Nuts (Part #4). Tighten all bolts of the chair
completely. Cover all Nuts with Nut Caps (Part #’5).
Step 2:
3
B
C
D
A
Spring Washer (M8)
Flat Washer (M8)
Nut (M8)
Nut Cap (M8)
8
Flat Washer (M8)
8
Bolt (M8)
6
Bolt Cap (M8)
12
Phillips Head Bolt(M6)
1
7
9
10
Spring Washer (M6)
Flat Washer (M6)
Nut (M6)
Nut Cap (M6)
3
2
4
5
10
X 4
X 4
X 8
X 4
12
X 4
9
7
8
X 4
6
5
X 4
X 4
X 4
X 4
4
2
3
X 4
1