Instructions / Assembly

Step 1.

Carefully turn top panel (part A) upside down on a soft flat surface, such as carpet,

as shown below. Open drawers, attach left panel (part B) to top panel (part A)

using long bolts (part #1), spring washers (part #3), flat washers (part #4) and allen

wrench (part #6). Attach bottom stretcher (part D) to left panel (part B) using

wood dowel (part #5), screw (part #2) and phillips head screwdriver. Attach right

panel (part C) to bottom stretcher (part D) and top panel (part A) using wood

dowel (part #5), screw (part #2), long bolts (part #1), spring washers (part #3), flat

washers (part #4), allen wrench (part #6) and phillips head screwdriver.

#1 x 8

#2 x 2

#3 x 8

#4 x 8

#5 x 2

#6 x 1