Installation Guide

Step 3. Carefully lay top panel (part A) upside down on a soft surface as

shown. Attach assembled legs (parts B & D) to top panel (part A)

using flat washers (part #5), spring washers (part #4), hex socket

head bolts (part #3), and allen wrench (part #10) as shown below.

Step 4. Attach back rail (part F) to back legs (part D) using wood dowels

(part #1), screws (part #2) and Phillips head screwdriver. Attach

assembled legs (parts C & D) to top panel (part A) using flat washers

(part #5), spring washers (part #4) hex socket head bolts (part #3),

and allen wrench (part #10) as shown.