Writing Desk CF6506
ADDITIONAL TOOLS (Not Provided) Note:It is not recommended to use power tools during assembly.
Step 1. Attach knobs (part #6) to the drawers using round head bolts (part #7) and Phillips head screwdriver. Step 2. Attach side rail (part E) to right front leg (part C) and back leg (part D) using wood dowels (part #1), screws (part #2) and Phillips head screwdriver. Attach side rail (part E) to left front leg (part B) and back leg (part D) using wood dowels (part #1), screws (part #2) and Phillips head screwdriver.
Step 3. Carefully lay top panel (part A) upside down on a soft surface as shown. Attach assembled legs (parts B & D) to top panel (part A) using flat washers (part #5), spring washers (part #4), hex socket head bolts (part #3), and allen wrench (part #10) as shown below. Step 4. Attach back rail (part F) to back legs (part D) using wood dowels (part #1), screws (part #2) and Phillips head screwdriver.
Step 5. Carefully flip desk upright.
