Installation guide

ManualsBrandsCrosley ManualsDryerOfficial Crosley dryer

NOTE:Thefollowingkitsforcloseclearancealternateinstallations

Chooseyourexhaustinstallationtype areavailableforpurchase.Pleaseseetheservicenumberlocated

onthebackpageofthismanualtoorder.

Recommendedexhaustinstallations • Over-the-TopInstallation:

Typicalinstallationsventthedryerfromtherearofthedryer.Other PartNumber4396028

installationsarepossible.

..............H

A. Dryer E. Clamps

B. Elbow F. Rigid metal or flexible metal vent

C. Wall G. Vent length necessary to connect

D. Exhaust hood elbows

H. Exhaust outlet

Standard exhaust installation with rigid metal or flexible

metal vent

Periscope Installation (For use with dryer vent to wall vent

mismatch):

Part Number 4396037 - 0" (0 cm) to 18" (45.72 cm) mismatch

Part Number 4396011 - 18" (45.72 cm) to 29" (73.66 cm)

mismatch

Part Number 4396014 - 29" (73.66 cm) to 50" (127 cm)

mismatch

Special provisions for mobile home installations

The exhaust vent must be securely fastened to a noncombustible

portion of the mobile home structure and must not terminate

beneath the mobile home. Terminate the exhaust vent outside.

Alternate installations for close clearances

Venting systems come in many varieties. Select the type best for

your installation. Two close-clearance installations are shown.

Refer to the manufacturer's instructions.

A. Over-the-top installation (also available with one

offset elbow)

B. Periscope installation

Determine vent path

• Select the route that will provide the straightest and most

direct path outdoors.

• Plan the installation to use the fewest number of elbows and

turns.

• When using elbows or making turns, allow as much room as

possible.

• Bend vent gradually to avoid kinking.

• Use the fewest 90 ° turns possible.

Determine vent length and elbows needed for best

drying performance

• Use the Vent system chart below to determine type of vent

material and hood combinations acceptable to use.

NOTE: Do not use vent runs longer than those specified in the

Vent system chart. Exhaust systems longer than those

specified will:

• Shorten the life of the dryer.

• Reduce performance, resulting in longer drying times and

increased energy usage.

The Vent system chart provides venting requirements that will help

to achieve the best drying performance.