Installation guide

( .
6. Switch door catch, bezel, & plug
a
Catch and bezel
|
Remove the door catch, bezel, and plug from the inside of
the inner door by squeezing and pulling/pushing them. Place
the door catch, bezel, and plug on the sides opposite from
where they were.
(7. Rotate outer door
Reattach outer door panel to inner door panel so handle is
on the side where hinges were just removed. Insert 4 door
screws.
18
{,
8. Flip door over
Flip door over so handle side is down.
f
9. Attach door hinges
Reattach door hinges to dryer door so that the larger hole is
at the bottom of the hinge.