User guide
1
Crosley Model CR12-1 MP3 Jukebox 
Unpacking Instructions & User Guide 
IMPORTANT NOTICE: Please read the instructions before connecting Jukebox to 
power source! Save all boxes and packing material in case you need to return the 
Jukebox. Do not break or destroy the foam packing. If item needs to be returned you will 
be responsible for obtaining proper packing material and return shipping. 
TO REMOVE JUKEBOX FROM SHIPPING CONTAINER: The Jukebox weighs 
about 90 pounds so it is best if you have two people to unpack the unit. First, carefully 
stand the shipping box on the top side. You will notice that the end of the box is taped on 
all sides. Take a small knife and carefully slice through the tape to separate the inner 
bottom section of the box from the outer container. You don't need to cut the cardboard, 
cut only the tape. Next, carefully tip the unit first to its side and then to the upright 
position. Now you should be able to lift the outer box up and away from the Jukebox. 
Next, carefully remove the foam packing material from the top and sides of the unit, 
taking extra care not to break or damage the foam, in case you need to return the 
Jukebox. Note: You will find the remote control, external antenna, and catalog with 
warranty information taped to the foam packing material. Remove them and lay aside 
until you finish unpacking the unit. 
To remove the plastic bag covering the unit, carefully tip the Jukebox to one side and pull 
plastic free from that side. Repeat for other side. To remove the foam supports from the 
bottom, tip the Jukebox to the side only enough to allow removal of the foam from that 
side. This is easier to do if you have one person tip the unit while the other removes the 
foam packing. Repeat to remove packing from opposite side. 
Special Note: The CD Player has two pieces of clear tape across the front to protect it 
from opening during shipment. You MUST remove this tape before attempting to open 
the CD player drawer. Failure to do so could damage the CD Player. 
Remove the plastic safety cover from the AC power plug. This product may be 
equipped with a polarized alternating current line plug (a plug having one blade wider 
than the other). This plug will fit into the power outlet only one way. This is a safety 
feature. If you are unable to insert the plug fully into the outlet try reversing the plug. If 
the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do 
not defeat the purpose of the polarized plug. 
We suggest that you keep all boxes and packing materials until your warranty has 
expired. If you would need to return your product it is your responsibility to 
provide proper packing for shipment to us. 










