Manual

Operating Instructions
(continued)
FAULT CODES:
_,'mp/_imer
F auto
hi = filter
med reset
Jo
V ON=OFF A FAN SPEED sleep
If the display reads "AS", a sensor has failed. Contact your
Authorized Service Center.
TO CHANGE TEMPERATURE DISPLAY:
#,rap/timer outo
med reset
Io
FAN SPEED sleep
\../
DO THIS:
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
YOU WILL SEE:
temp/Omer
auto
hi =C reed
/o
filter
reset
V ON=OFF A FAN SPEED sleep
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
TO TURN UNIT OFF:
tempi#met
F auto
hi = filter
reed reset
1o
V ON=OFF A FAN SPEED sleep
YOU WILL SEE:
temp/ttmer
®a.,o
hi filter
med reset
Io
V ON=OFF A FAN SPEED sleep
\ DO THIS:
PRESS
ON/OFF BUTTON
Note: If the unit is turned off in heat mode (if applicable) or
fan only mode, it will return to the same setting when it is
turned on again, When the unit is turned off in cool or energy
saver(econ) mode, it will run in energy saver(econ) mode
when it is turned on again, but the setting of temperature
and fan speed will remain.
9