C100BT C100 Turntable Instruction Manual Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday – Friday 1-888-CROSLEY www.crosleyradio.
English Important Safety Instructions Read and understand this entire manual before using this product. Keep these instructions for future reference. 1. Read these instructions carefully. 2. Keep these instructions for later reference. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use the device near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Always ensure a sufficient ventilation. Install in accordance with the manufacturer’s instructions. 8.
English Items in this package Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package: • Turntable • Turntable Lid • Turntable Platter • Turntable slip mat • Headshell • 45 RPM adapter • Tonearm Counterweight • RCA Cable Please contact Crosley customer service if there is any accessory missing from the package. Retain the original packaging materials for exchange or return purposes.
English Product Description 1. 45 RPM Adapter 2. Turntable Platter 3. Turntable Spindle 4. Strobe Dots 5. Power Knob 6. Start/Stop Button 7. Hinges 8. Spare Headshell Holder 9. Tonearm Counterweight 10. Downforce Scale Dial 11. Anti-Skate Adjustment Dial 12. Tonearm Lift 13. Cue Lever 14. Tonearm Rest 15. Hold Down Clip 16. Tonearm 17. Pitch Control 18. Headshell Locking Ring 19. Headshell 20. Bluetooth Pairing Button 21. Speed Selector 22. Phono/Line Jacks 23. Ground Connector 24. Phone/Line Switch 25.
English Initial Setup Essential Setup 1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. 2. Install the turntable lid to the hinges. 3. Remove the tie-wrap that is holding the tonearm. 4. Install the turntable platter and drive belt accordingly 5. Place the slip mat on top of the turntable platter. 6. Insert the Headshell into the socket at the front of the tonearm, and then turn the Headshell Locking Ring counter-clockwise.
English Turntable Platter and Belt Setup 1. Install the drive belt over the inner ring under the platter and make sure it won’t fall off during the setup. 2. Place the platter through the turntable spindle, then rotate the platter until you see the drive motor pulley through the window at the top right corner. 3. Carefully grab the drive belt and put it around the slot of motor pulley. Phono/Line Switch For increased flexibility of use, this unit has a built-in stereo phono pre-amplifier.
English Turntable Operation 1. Turn the Power Knob clockwise to turn on the power. 2. Set the Speed Switch accordingly Note: When 33 RPM is selected the Speed Switch LED will be red. When 45 RPM is selected the Speed Switch LED will be green. 3. Place the record on the turntable. Use the 45 RPM Adapter if necessary. 4. Remove the stylus protector from the stylus assembly. Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned. 5.
English Bluetooth Operation This turntable features Bluetooth output which is a device that transmits audio from this turntable to another Bluetooth device such as wireless Bluetooth headphones, Bluetooth speakers, or other Bluetooth receiving devices. When connecting a new Bluetooth device to receive a signal from the turntable, you need to pair it with the product. Once your device and the turntable are paired, you do not need to pair them again.
English 5. To turn off the Bluetooth connect, press the Bluetooth Pairing Button and the LED will be red. Note: - You can connect up to 8 different Bluetooth devices. - You can delete all previous connected devices by pressing and holding the Bluetooth Pairing Button for 10 seconds, and then releasing it. Pitch Control Adjustment • When the platter is spinning, observe the bottom set strobe dots on the edge of the platter.
English Installing Needle 1. To install, position new needle with stylus tip facing down. 2. Align the needle with the cartridge, and gently push onto cartridge until fully seated. Avoid touching the stylus tip during installation. Cartridge Replacement 1. Before replacement, put the stylus protector back on the stylus to prevent damage to the stylus during the replacement process. 2. Turn the headshell locking ring clockwise to release the headshell and remove it from the tonearm. 3.
English Turntable Maintenance 1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the turntable mat or a record’s edge. 2. Clean the stylus frequently with a soft brush with a back-to-front motion only. 3. Clean the records to get rid of dust or grease with a record cleaning brush and record cleaning solution. 4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber cloth.
English FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
